Mold Removal, is often times best left to the professionals. Without conducting a proper, Mold Inspection, and, Mold Testing, prior to the start of a, Mold Remediation, project will often times spell disaster.

Mold Abatement, can be complicated, therefore it is vital to know the extent of the damage and to establish proper containment before beginning the, Mold Cleanup, process.

Not all mold is dangerous to you and your family's health. Therefore, mold testing, is an important first step in determining both the severity of your problem and the protocol for the, mold removal, process.

Our philosophy is simple, provide high quality work by experienced technicians. This will help make your living environment healthy and safe for you and your family. We will follow all EPA guidelines for, mold remediation. In addition, we are fully insured and bonded for your protection.

Our goal is to keep you and your family safe both during and after the, mold removal process.

The first step before, mold cleanup, can begin, is to fix the problem that caused it. Whether it is a plumbing leak, poor ventilation or flood damage, this must be corrected first before the, mold cleanup, process can begin.

The next step is to have a certified, mold inspector, perform a detailed, mold inspection, of the home which should include, mold testing. This, mold testing, will serve several purposes. It will tell you if what you have is truly mold, how high the levels are, what type of mold it is and how hazardous it is to you. It will also show how prevalent the mold is in the air of the home. This will determine whether or not the duct system needs to be treated and if the home needs air scrubbers set up to kill airborne mold spores.

Mold clean up, is a complex process best left to experienced and certified mold remediation professionals. Proper Personal Protective Equipment (PPE) must be worn and the proper containment procedures followed to prevent mold from spreading to unaffected areas of your home.

If this is not done, a serious risk of cross-contamination can occur, exacerbating the problem further. Proper containment consists of sealing off all surrounding mold free zones of the home through use of a negative pressure air containment system. This system will isolate the work area and prevent the mitigation of contaminants to the unaffected areas of the home.

During a typical, mold remediation, project, many of the following steps are performed: Remove, properly bag, transport and dispose of contaminated materials such as drywall, insulation, carpets and miscellaneous contents.

Hepa Vac all affected work areas such as beams, walls, floors etc. Then clean, disinfect and sanitize all affected areas using a quaternary ammonium chloride blend disinfectant mold killer.

After this is done, all contaminated areas need to be sealed using an antimicrobial fungicidal protective coating. If testing has determined that a large count of mold spores are present in the air, it is recommended that air duct cleaning and sanitizing be performed as well as air scrubbers be set up to remove the mold from the air in the home.

We, at Absolutely Spotless, strictly follow the recommended EPA guidelines for, mold remediation. Our goal is to keep you and your family safe, both during and after the, mold remediation, process.

If you ever have any questions during the, mold removal, process, we will be happy to answer them for you.

You can trust Absolutely Spotless with your most precious commodity, the health of you and your family.

A Negative Pressure Air Containment System is utilized to keep
the home safe from cross contamination.